All Metal Tube Laser
Tube laser cutting for structural sections, pipe, RHS, SHS, angle, beams, columns and long length components.
Tube laser cutting prepares structural sections before fabrication, assembly or installation
It can be used for complex cuts, notching, repeat components and detailed section work, helping reduce manual cutting, marking and fit-up time.
12m infeed and 12m outfeed capacity.
Large diameter pipe and heavier sections.
Two HG machines at 12kW and a 6kW HSG.
Across both 12kW machines.
Our tube laser cutting services include
Structural tube cutting
For RHS, SHS, CHS and pipe sections.
Beam and column cutting
For universal beams, universal columns and heavier structural sections.
Angle and channel cutting
For structural profiles used across fabrication and industrial work.
Long length processing
For components and sections up to 12m in length.
Notching and detailed cuts
For sections that need accurate joints, slots, holes or connection details.
Production cutting
For repeat components and higher volume structural work.
Our tube laser equipment includes
Three tube lasers for structural tube and section processing. If your job sits near the limits, send the drawing through and we will confirm.
9m HG Tube Laser
12m HG Tube Laser
HSG High Performance Tube Laser
We process a range of structural profiles
Structural profiles processed for fabrication, manufacturing and industrial component work.
Make an enquiry
RHS
Rectangular hollow section, cut, notched and holed ready for frames and supports.
SHS
Square hollow section for framing, posts and general structural work.
CHS / Pipe
Circular hollow section and pipe up to 510mm chuck diameter.
PFC
Parallel flange channel with accurate end cuts and connection details.
Universal beams
Beam sections cut, coped and holed before fabrication.
Universal columns
Column sections processed for baseplates, cleats and connections.
Angle
Equal and unequal angle for bracing, cleats and support work.
We cut mild steel, stainless steel and aluminium sections for structural, fabrication and production work, with the same accuracy and detailing across each material.
The standard across structural and fabrication work, cut up to 20mm on both 12kW machines.
For corrosion resistant sections and components where finish and cleanliness matter.
For lighter structural and frame components without losing cut accuracy.
Where tube laser cutting is used
Tube laser cutting is used for structural components, frames, supports, chassis work and repeat fabricated parts.
Mining
Sections and components for bulk materials handling, conveyors, transfer systems and plant structures.
Transport
Tube and structural components for trailer, chassis, truck body and bus frame manufacturing.
Renewable energy
Structural sections for solar mounting, ground-mount frames, tracker torque tubes and roof-mount rails.
Fabrication
Pre-cut tube and sections ready for assembly, welding or further fabrication.
Tube laser cutting reduces manual section work
Tube laser cutting helps reduce the manual work usually needed to mark, cut, drill and fit up structural sections.
Accuracy
Prepare sections with repeatable cuts, holes, slots and connection details.
Labour
Reduce manual cutting, drilling and fit-up work before fabrication.
Output
Support repeat components, longer sections and higher volume structural work.
Fit-up
Create cleaner connection points so parts are easier to assemble and fabricate.